CG-TCXG-02S-G 2 Gang 1 Way touch wireless RF remote control switch - Smart home control system 86 glass panel Switch
Support 1/2/3/4 gang
This smart wall touch switch has been installed with RF signal so your lighting system can be controlled through RF support devices.
The Smart home touch wireless RF remote control switch makes your lighting on /off, panel looks smarter by using Touch panel instead of traditional button.
Size of the wall switch is the same size as traditional wall switch (86mm x 86mm), so it is very easy to “upgrade” your panel.
Type: Starlight Series Smart home control system 86 glass panel 1 way Switch
Color: BLACK / WHITE / GOLD / PURPLE
Remote Control Distance:>30m In Room
Input Voltage(V): AC110-240V 50-60Hz
Total Rated Load: 3-500W/Gang
Panel Material: Tempered Toughened Crystal Glass Panel
Self Consuming Power: Less than 0.035mA
Lamps for Switch: All kinds of lamps, but need to over 3W
Operating Environment: -30~70 Centigrade; less than 95% RH
Note: Smart home control system 86 glass panel Switch RF remote control function have to be used combining with WiFi Smart Remote Control Panel switch (FREE sticker). --- (Option: Multiple remote controls can simultaneously control one Smart home switch.)
Note: Smart home Switch wifi remote control function have to be used combining with RM Plus Wi-Fi host (Mobile APP: Android, iOS)
1×Original CG-TCXG-02S-G Wifi Touch panel Light Switch
Remote control, FREE Sticker, Mobile APP, scene panel and switch pairing method:
Step 1: Press and hold the touch switch for more than 3 seconds, and then release the finger after hearing the "di" sound.
Step 2: Please press the button on the remote control (such as the "A" button) within 20 seconds, or the light button on the APP software, or touch the FREE Sticker. After hearing the sound of the switch "di", it means pairing success. If you hearing a "di" two times, it means that the button has been paired. If you hearing a "di" four times, it means that the switch is full, you need to perform the clear operation. If there is no operation after 20 seconds, the switch will issue the "di" four times indicates that the pairing timed out and needs to be re-paired.
The pairing process ends. At this time, the "A" button or the light button on the APP software can control this switch.
Step 1: Press and hold the paired touch switch button for more than 6 seconds, and then release the finger after hearing a "di" two times.
Step 2: Press the button on the remote control (such as the "A" button) or the light button on the APP software, or touch the FREE Sticker. When you hear the sound of the switch "di", unpair.
Press and hold the touch switch button for more than 9 seconds, until the switch continuous issue a "di" three times, release your finger, all the emote control pairs will be cleared.